Over 300 5-Star
Ratings On Google!
Always Available!

Six Indicators to Discover if Your Indoor Air Has Been Polluted

When the air in your home has issues, unable to actually see anything out of the ordinary. You could smell something, or suffer headaches or nausea, but a tool is required to determine just what is polluting your indoor air and how significant the issue actually is.

The tool is called an Air Advice Indoor Air Quality Analyzer. It’s placed in a central room of your home and will sample the air for about 30 minutes before producing a report that details six different test results.

Six Measurements Analyzed

allergens photo

Photo by rkimpeljr 

The first would be for the volume of particulates, like pet dander, dust, and other allergens.

Another is chemicals, VOC compounds, Volatile Organic Compounds, typically found with new carpet, but even with older carpets. VOC gases also result from fresh paint, producing what we recognize as ‘new house smell.’ That smell is actually VOC gases in your home. The tool will rate them based on acceptable levels.

Carbon dioxide is another concern for which the analyzer will test. If the levels are found to be too high, it can mean your home is too well sealed and not enough fresh air is getting in. Levels can rise as the seasons transition, for instance when the weather becomes more mild and you’re not using your system so the blowers are off and air isn’t circulating, causing stagnant air to develop, often raising carbon dioxide levels.

The analyzer will also test the accuracy of your thermostat by comparing what temperature you have set to the actual temperature and measure your current air status.  Based on air quality, whether you need to adjust the setting can be evaluated.

Relative humidity is especially important in the winter, but can also be a factor in the summer. The system will indicate if a humidifier is required and actually recommend an appropriate unit along with benefits realized with various available options.

The biggest concern in the winter is carbon monoxide. The analyzer will measure the levels in your home. Detectors should also be present in the home on an ongoing basis.

How to Purify Your Indoor Air With Houseplants

houseplants photo

Photo by F. D. Richards 

Most of us are aware that polluted air can negatively impact your health. Allergies, respiratory challenges, and even heart disease can result. However, we may not be aware that air inside our homes can be as much as one hundred times more polluted than the air outside, depending on the time of year. When your home is sealed up tight against extreme cold or heat for the entire season, it can impact your air quality. Even if negative health effects aren’t immediately realized, they might appear years later, but there’s something you can do to minimize your exposure.

Nature’s Remedy

There are numerous ways to improve your air quality, but probably the least expensive and most natural is to fill your home with house plants. Some are more efficient than others to neutralize mold, dust mites, pet dander, pollen, and other allergens. You’ll find house plants aren’t just aesthetically pleasant decor, they will act as natural air purfiers, cleaning the air and allowing you and your family to breathe freely.


Plants that Will Improve Your Air Quality

It’s important you use the right plants, so here is a list of the top cleansing plants and what toxins they will help remove.



Specializing in Air Conditioning & Heating Repair and Installation
for Wylie, Texas and surrounding areas for over 30 years, we have
made our primary focus the complete satisfaction of every customer.
We’re a company you can trust. Call us today! (972) 693-2343

Locating the Appropriate AC System

air conditioner photo

Photo by nist6ss 

Recognizing the attributes of the various kinds of A/C systems is necessary. Discovering the best one for your residence could be testing if you have no idea exactly what to try to find. Selecting the very best choice could be frustrating when checking out everything that’s available.

Whatever type, a/c systems have comparable functioning elements. These consist of the cooling agent, compressor, condenser, expansion valve, and evaporator coil. They all collaborate to move warm air and moisture from the within your house to the exterior.

Here are details that might aid you to comprehend exactly how they run.

Window A/C

air conditioner photo

Photo by mvhargan 

This is additionally called a “unitary” a/c system. It includes a self-supporting cooling system put in a home window or in an opening in a wall surface. All its parts remain in one compact box. It expels warmth from its exterior side and also blows cool air through its interior side. Window a/c could cool down any kind of area, from a solitary space to a whole floor.

They also come in a variety of sizes with numerous features that differ from unit to unit. Most fit standard window sizes.  If your windows are more or less than standard, then be sure to take measurements before making a purchase. There may be additional material you’ll need to fit the window, so it’s best to be sure before you’re committed.

Portable Air Conditioning Units

This system is also a unitary a/c system. It is a mobile system positioned on the floor of a space. It releases exhaust heat through a vent hose via a wall or home window.

These systems are a little bit louder compared to various other kinds and also typically suitable for areas under 500 square feet. These are really suggested for anywhere it’s difficult to set up a home window system. Like the home window ac unit, this system has all the elements in one compact box.

Since it rests inside your home, the evaporator fan runs continuously to vaporize condensed moisture. In a window-mounted device, condensed moisture just leaks onto the ground.

Split (Ductless) Air Conditioners

ductless photo

Photo by AC Home X 

Split a/c systems are likewise called “ductless” or “mini-split.” They prevail in residences in addition to resorts as well as various other multi-unit structures. It’s prominent for houses that are not using a forced-air HVAC system. A lot of them additionally provide home heating features.

This system has 2 terminal units. The outside condensing system consists of the compressor, condenser, and also condenser fan. The evaporative device is typically a rectangle-shaped box established high up on an indoor wall surface. It deals with the air cooling and circulation in the space. It includes a circulation fan, expansion valve, as well as evaporator coil. Refrigerant tubes travel through the wall in between both units.

Central Air Conditioning

Air conditioning is the biggest sort of standard ac system. It has a condensing unit and also an evaporative unit attached by cooling agent tubes. The exterior condensing system holds the compressor, condensing coils, and condensing fan. The evaporative system includes the evaporator coil and the expansion valve. It sits in the plenum, the chamber in between the furnace and the air duct system.

This system makes use of the very same ductwork and blower fan as your heater. It is most efficient for cooling down whole houses. The greatest concern is correct sizing; an oversized system will certainly not sufficiently dehumidify, while if too small, could not cool down the area properly.

In Conclusion

If you still have questions, consult a professional to determine which type of system is appropriate for your home and climate. At the very least, have one confirm you’ve made the correct decision.



Specializing in Air Conditioning & Heating Repair and Installation
for Wylie, Texas and surrounding areas for over 30 years, we have
made our primary focus the complete satisfaction of every customer.
We’re a company you can trust. Call us today! (972) 693-2343

Home Maintenance Schedulefor 2018

Since 2018 has arrived, it’s a good time to consider some maintenance projects to keep your home in excellent shape over the year. Having a home maintenance schedule checklist helps ensure you’re on point to make sure your home operates efficiently and is comfortable all year.

Home Maintenance Made Easy

Creating a simple schedule will make preparing your home for winter effortless. The following guidelines will help you develop your own schedule.

Recommended Home Maintenance Schedule for 2018

Each Month…

Each Quarter…

Twice a year…

Once a year…

Keeping Your Heating Costs Down

home maintenance schedule

Photo by Phil Denton 

It’s time to think about the most effective methods to warm your residence, and the thermostat is an extremely important component of the procedure. The system’s age, just how you maintain it, also where in your house it’s installed could all influence your home heating costs.

The air emanating from your heater is the same temperature despite the weather outside. Raising your thermostat does not affect just how warm the air is, it simply makes your heater run much longer.

If you’re setting your thermostat higher, that will certainly make your system run longer as well as most likely overwork the system while elevating your expenses.

If your thermostat is set to 70 degrees, yet the real temperature level in your house is 62 degrees, that possibly implies there’s a concern with the system and that you ought to have it evaluated.

Specialists advise obtaining a programmable thermostat so you may establish a reduced temperature when you typically aren’t there. It will usually pay for itself within a year.

A few other suggestions for maintaining a cozy residence for much less cash:

heater photo

Photo by dr.mafisto 

If you do utilize a space heating units, make certain it has the UL tag as well as a tip over shut down feature. Of course, these should never be left operating unattended.

The placement of the thermostat is additionally vital to preventing incorrect readings. The objective is to have the thermostat as centrally located as is feasible, far from direct sunshine, or a kitchen area … those locations where you’re getting some intrinsic temperature level variances.

Lots of households wait to activate their heater till the weather turns, only to find it’s not functioning appropriately. Here are some pointers to guarantee your heating system is operating effectively and continues to do so:



Specializing in Air Conditioning & Heating Repair and Installation
for Wylie, Texas and surrounding areas for over 30 years, we have
made our primary focus the complete satisfaction of every customer.
We’re a company you can trust. Call us today! (972) 693-2343

I smell something burning when I turn on my heater for the first time this season.  Is there anything to worry about?

We do not turn on our heaters in Allen, TX nearly as often as our A/C system, yet we most definitely experience serious cold weather for a couple of months of the year that calls for running our heating unit.

While this short article will probably comfort you in that there is not a threat of fire from that burning smellyou are experiencing, it would certainly be reckless for me to encourage you not to have it checked out … specifically if you have a gas heating system which uses an open fire.

It is most likely that the scent from your main furnace is triggered by dust, dirt, pet dander and so on that has actually gathered on the internal surface areas of your heating system and is currently being burnt off by your heater. While this is unpleasant to take in, as well as an indicator your heater requires a cleansing, it is probably not likely to trigger a fire.

When the Burning Smell is Accompanied by Smoke

firetruck photo

Photo by _TC Photography_ 

That stated, if you see or scent smoke– remove every person from the house and call 911.

You must never ever see smoke originating from your vents, attic room, or honestly anything related to your heating unit whether it’s a heat pump, gas heater, or electrical heating system.

If you have actually ever before scented the distinctive smell of something electric burning, and that’s the smell you’re experiencing — shut off your system instantly and also call your home heating and A/C firm to inspect the system. Burning electric scents are normally connected with damaged electric motors. It is very important to change defective electric motors and also circuitry prior to damages that could be done to various other elements.

Regarding System Maintenance:

You ought to have your heater checked out and cleaned up prior to using it each year, just as you must prior to you switching back to A/C each season.

Pre-season maintenance and cleaning will certainly stop this smell, due to the fact that your system will be cleared of any kind of dirt, dander to burn off when you turn up that heating unit. Second of all, challenges like malfunctioning electric motors, capacitors, circuitry, and so on will be recognized and fixed before there is any kind of danger of additional damages or fire!

The bright side is, if there is no indicator of smoke, or distinctive electric burning odor, you are possibly not in jeopardy and your home should not be at risk. Nevertheless, you and others in the home are inhaling some potentially unpleasant particles, so have a cleansing done!

Another Aspect of your Heating System to Consider

Air Duct Sealing and How it Helps

duct work photo

Photo by jackiebese 

Your ducts are an integral part of your house heating and cooling system. They are the means by which your system disperses the conditioned air throughout your home. It may surprise you to know that between 20 to 30 percent of the air circulating through your air duct system is misdirected because of leakages and openings? This could have a substantial influence on both the comfort level of your home and the expense involved with running the system.

Advantages of Air Duct Sealing

An air duct system that is correctly secured will create a comfortable atmosphere in your home, it could likewise aid with power effectiveness and efficiency. Here are some of the advantages of air duct sealing:

Enhances the Comfort of your Home

family room photo

Photo by Vegan Feast Catering 

A sealed and insulated air duct system will improve the level of comfort in your home in that you will no longer experience cold and hot spots where rooms are unevenly heated or cooled.

Enhances Security

Gas home appliances like heating systems, hot water heater, or clothing dryers will vent gases such as carbon monoxide normally. If you have leakages in your duct work, this could trigger a back draft, which pulls these gases right into your house as opposed to venting it outside, as it should be. Sealing your air ducts will eliminate this risk by reducing the danger of having these gases enter your residence.

Enhances Indoor Air Quality

There are a variety of toxins, chemicals, particles, other irritants that could enter your residence from outside or with house chemicals and cleansers. When you seal your air ducts, you are minimizing the danger that these contaminants will bleed through the air duct systems and distribute themselves throughout your residence.

Saves Money

money photo

Photo by free pictures of money 

By sealing the leakages in your duct work, your HVAC system will run a lot more successfully. This means significant financial savings on your power costs! In addition, it helps you maintain a pleasant comfort level in your home.







Specializing in Air Conditioning & Heating Repair and Installation
for Wylie, Texas and surrounding areas for over 30 years, we have
made our primary focus the complete satisfaction of every customer.
We’re a company you can trust. Call us today! (972) 693-2343

We have actually already seen freezing temperature levels this season– an unwelcome reminder that winter is here.

It’s time to think about the most effective means to keep warm in your home, and a programmable thermostat is a critical component of that process. The age of your thermostat, exactly how you handle it, and the placement of it in your house could all impact your home heating expense.

The air pumped from your heating system is always the same temperature level no matter the climate condition outside. Raising your thermostat does not alter just how warm the air is, it simply makes your heater run much longer. Professionals concur that this false information could have customers overburdening their heating system.

If you’re setting the temperature to a high heat on your thermostat, that will certainly make your system run longer, as well as most likely overwork the system.

Commonly, if your thermostat if set to 70 degrees, however the real temperature level in your house is 62 degrees, that most likely implies there’s a concern with the system you’ll have to look at.

Obtaining a programmable thermostat so you could immediately reduce the established temperature level when you typically aren’t in the house is highly recommended.

A programmable thermostat will usually pay for itself in a year or two.

Other ideas for maintaining your house as a cozy refuge for much less cash:

If you do utilize space heaters to keep warm, see to it they have the UL tag and also a tip-over shut down feature, and never ever leave them unattended.

Thermostat Placement is Critically Important

programmable thermostat photo

Photo by PhilipsPhotos 

The placement of your thermostat likewise is crucial to preventing incorrect readings. The objective is to have the thermostat as central as is feasible without leaving it subject to false temperature readings.

Put it far from direct sunshine, far from a cooking area, or any one of those locations where there are variations in temperature which would mislead the thermostat. As such, a cellar is a poor place.

When it comes to the heater itself, below are some ideas for making it run better:

Many people have gas heaters, and keeping items like a lawnmower, gas can, or weed eater near the unit poses a tremendous risk of fire, or even an explosion.

Don’t Wait for Snow! Be Certain you’ll Keep Warm with a System Checkup

snow photo

Photo by mild_swearwords 

Lots of households wait to switch on their heater till the temperature level goes down, just to realize it’s not functioning effectively.

It’s a risky practice and leaves you open to a potential crisis if your system is needing any kind of repair. Winter falls pretty much the same time each year, so we should do the smart thing and prepare for the worst, just in case.  Contact a professional for a system checkup!

For more great ideas on how to survive the cold winter without breaking the bank or freezing anything off, visit our blog!


If the Worst Happens…



Specializing in Air Conditioning & Heating Repair and Installation
for Wylie, Texas and surrounding areas for over 30 years, we have
made our primary focus the complete satisfaction of every customer.
We’re a company you can trust. Call us today! (972) 693-2343

When you observe an unexpected rise in your energy expenses or your residence is not as comfortable as it ought to be, there can be an issue with your home heating as well as a/c devices. Nevertheless, they represent approximately fifty percent of your total power usage. A number of elements could trigger them to come to be ineffective. Several of these are obvious, while others call for some examination of your system.

Home Heating and A/C: Just What Triggers Energy Inefficiency?

air filters photo

Photo by Ivy Dawned 

Defective home heating and cooling systems not just endanger your residence’s comfort and power performance however could additionally influence your wellness. That is why when you discover any one of these issues, look for the assistance of a specialist.

The Effect of Snow and Ice on Your Cooling And Heating System

We’ve currently covered ways to prepare your residence for chilly temperature levels, however do you understand the prospective effect snow and ice may have on your A/C system? Adhere to the guidance following to prevent replacing your heating system prior to it’s being definitely required.

Exactly How Winter Issues Affect Your Cooling and Heating System

air filters photo

Photo by john1710 

There are a number of ways in which snow and ice could harm your cooling and heating system:

Safeguarding Your Cooling and Heating System

heat pump photo

Photo by Anosmia 

Inevitably, the winter makes your A/C device work twice as hard. Air movement is typically minimal, which can cause short circuiting of your device or wearing out faster compared to what you anticipated. Here are our leading pointers for securing your Heating and Cooling system this winter and also extending its life expectancy:

Tip from the Pros: Cover your pipes if they are exposed to the elements!

Energy Inefficiency is Sometimes just an Overwhelmed System

Most importantly, manage your expectations for system performance in the winter. Your cooling and heating system is intended to perform optimally on cold days, just not on ALL cold days. Below zero temperatures may exceed the capabilities of your system, so put on a sweater, don’t turn up the heat.

If you do experience problems, or have any type of concern regarding your cooling and heating device, contact us! Whether your cooling and heating concerns are brought on by snow, ice, or other problems, we look forward to keeping you and your family cozy this winter.

Need a new heating system?

Call for a Free Estimate!



Specializing in Air Conditioning & Heating Repair and Installation
for Wylie, Texas and surrounding areas for over 30 years, we have
made our primary focus the complete satisfaction of every customer.
We’re a company you can trust. Call us today! (972) 693-2343

AC Lemon Laws and Service Warranty Info

If your new air conditioning unit isn’t working properly, you may be wondering if there are any steps you can take resembling the lemon laws effective in the car industry, especially if your unit is out of warranty.

Alternatively, you might be purchasing a brand-new A/C system and are questioning if you need to invest the extra cash to acquire an extended labor service warranty.

Do AC Lemon Laws Exist?

We are all accustomed to the term “lemon law” thanks to the pre-owned car industry. Numerous states have actually applied lemon laws to protect customers from deceitful secondhand car suppliers that acquire and resell cars and trucks that most likely ought to have gone to the scrap yard instead of being re-sold.

When an AC and heating system is installed brand new, there are no lemon laws for these sorts of acquisitions. State lemon laws just apply to vehicles, not consumer items. This does not suggest you have no defense, you are probably protected by various other means.

Federal Consumer Protection — The Magnuson Moss Warranty Act

Under government legislation, manufacturers and suppliers are not required to provide warranty on a product; the item could be marketed “as is.” Nonetheless, if an item does have a warranty, this regulation protects customers by applying that warranty. It is essential to keep in mind that a consumer needs to enable the supplier or distributor sensible opportunity to do so. The “reasonable” component may come under question however, so you need to consider your next steps carefully.

The Magnuson Moss Warranty Act was established to stop manufacturers from making use of challenging legal language like misleading disclaimers. For AC and heating units, there are typically two warranties applicable: a factory warranty from the manufacturer and one offered by the installer, covering labor for a stated length of time.

The law is actually intended to enforce the manufacturer warranty, not the contractor’s installation. Manufacturers that offer written warranty cannot disclaim a suggested warranty. Nevertheless, contracted service providers are not the entity offering warranty so they (by law) may disclaim suggested manufacturer service warranties on the items they market.

That would mean that if for some reason the unit has an issue, the manufacturer must honor the warranty. The contractor may defer, citing you may still rely on the manufacturer’s warranty to hire another licensed service provider.

However, if the warranty is issued by the service contractor, they must honor it. On the consumer’s part, they must give the contractor a sufficient, reasonable amount of time to address the issue. That’s where most go wrong; they expect immediate solutions that sometimes don’t happen that way.

If there’s a breakdown between you and your contractor, it may be best to move on to one you trust and just take the hit. Even suing may not provide adequate solutions, unless the settlement amount would be large enough to make it worthwhile. Most times the only winners in those situations are the lawyers.

What are the Expectations with a Failing Newer System?

hvac system photo

Photo by seanmfreese

Of the hundreds of new systems installed each year, there are going to be a small percentage of them that fail for one reason or another within the first couple of years, especially in locations that experience extremely cold weather over an extended period. With hundreds of mechanical, electronic, and sometimes heat-sensitive electronic components, it’s reasonable to expect there might be occasional failures.

Understand that the failure of a single component, while it may keep your unit from operating properly, it may not constitute a lemon law violation. That single component may have a failure, but that doesn’t mean you have a lemon on your hands if the remainder of the unit is operating as it should.

Manufacturers / Contractors and Factory Warranties

It’s critical to understand the relationship between contractors and manufacturers with regard to the warranty process. As HVAC manufacturers are only able to sell their products to licensed installation contractors, the contractors purchase your unit and peripherals and you are the benefactor of the full factory warranty. You are responsible for maintaining the unit per manufacturers requirements. The manufacturer sets the terms of the warranty they must honor, which the contractor has no influence over, and they always honor the terms of their warranties.

Recognizing Your Labor Service Warranty

contractor photo

Photo by Elvert Barnes

Your contractor is responsible for your labor warranty. They will honor the terms of their warranty without the involvement of the manufacturing company. The manufacturer has no influence on coverage offered in a labor warranty, however if your challenge involves any parts, the manufacturer will provide them or reimburse your contractor for them.

Understand that the thousands you pay for a new system covers the cost of the equipment, parts, and all that it takes to run the business associated with that installation, like payroll, overhead, etc. Consequently, contractors will seek to install only the most reliable systems as it’s in the best interest of both of you. Warranty claims cut into profits significantly, so installers want to install a reliable system.

AC System Extended Parts and Labor Warranties

There are extended parts and labor warranties offered that offer comprehensive coverage above and beyond the standard, usually through a third party company. They are issued directly to the consumer. Caution should be observed when considering “included” or “in-house” warranties. If for some reason your installer goes out of business, you’re left holding worthless paper. You should also be aware that consumers are allowed to purchase this type of coverage as much as 10 years after initial purchase. There is typically a deductible involved, specified in your agreement.

Rates of extended warranties are based on the particulars of your system, like brand, accessories, length of coverage, type of system (heat pump, gas furnace, etc.) and configuration (rooftop, split-system, ductless, etc.), typically ranging from $1200 to $2800.

The Contractor is Always on Your Side!

superman photo

Photo by dmuth

The contractor recognizes you as their client, where the manufacturer does not. The manufacturer considers the contractor their client.

Your contractor will be your hero when it comes to making sure your claim is handled appropriately. AC manufacturers are huge corporations selling millions of units a year, while in comparison, your contractor is a blip on the radar. You are always recommended to partner with your contractor as an ally to ensure your system remains at peak efficiency.

Exactly how New is Your New System? Life Expectancy per your Manufacturer

Here are some details that could aid you to identify if an extended warranty is ideal for you:

Even though 30 year old equipment can continue to serve, so long as there are parts available, it may not be the most cost effective solution. Most manufacturers suggest a life span of 12-15 years for today’s equipment, with the exception of some ductless models, which may live a bit longer. Hence the prevalence of 10 year warranties.

According to the manufacturer, an HVAC system uses about 6.7%-8.3% of its life each year. By year 3, 20%-25% of its life has been consumed. As such, systems are using a quarter of its expected life span in three years, so “new” is extremely relative.

In Summary

While there are no AC lemon laws, overall, your HVAC system should be reliable, but to protect against eventualities, a warranty is recommended. Just be sure to read your contracts and determine if it serves your needs, and rely on your contractor to advise you appropriately, but if you determine it advisable to purchase an extended warranty, do it independently.



Specializing in Air Conditioning & Heating Repair and Installation
for Wylie, Texas and surrounding areas for over 30 years, we have
made our primary focus the complete satisfaction of every customer.
We’re a company you can trust. Call us today! (972) 693-2343

What You Should Know About New Minimum SEER Requirements in Texas

January 1, 2015 – Minimum SEER Value in Texas raises to 14 SEER

Standards for air conditioners, heat pumps, and weatherized furnaces will take effect on January 1, 2015.

Split-system air conditioners installed on or after January 1, 2015, in Alabama, Arkansas, Delaware, Florida, Georgia, Hawaii, Kentucky, Louisiana, Maryland, Mississippi, North Carolina, Oklahoma, South Carolina, Tennessee, Texas, Virginia, or in the District of Columbia, shall have a Seasonal Energy Efficiency Ratio not less than 14 SEER.

The Department of Energy sets energy-efficiency standards for HVAC equipment that manufacturers must meet. The standard is measured as the Seasonal Energy Efficiency Ratio (SEER): a number prominently displayed on the bright yellow Energy Guide sticker on the side of air conditioners, heat pumps and other equipment.

==> See New Department of Energy Standards Here

The higher the SEER rating, the more energy efficient the unit is, and the more money you can expect to save by operating it. If you have an older air conditioning unit, you might see that it has a rating of 8 or 10 SEER.

More recently, units have been manufactured to achieve 13 SEER, to meet the DOE’s requirements.

What are the national savings and benefits from the new standards?

According to DOE, the AC and heat pump standards will save about 156 billion kilowatt hours of electricity over 30 years, or roughly enough to power 8.7 million typical U.S. homes for one year.

The furnace standards will save about 31 billion therms of natural gas over 32 years, or about enough to heat 62 million typical U.S. homes for one year.

What is the impact of this rule making on consumers?

Although the average installed cost of a new furnace, AC or heat pump is estimated to increase some as a result of the standards, this cost is more than outweighed by energy bill savings over the life of the product.

According to DOE, the typical buyer will net about $150 in savings over the life of a new air conditioner meeting the standard, a heat pump buyer will net about $146 and a furnace buyer will net $571 compared to a product just meeting the current standard.

A typical northern furnace buyer will save about $54 per year on heating bills, a typical southern air conditioner owner will save about $22 per year and an average heat pump buyer will save $29.

What if the equipment manufacturers, distributors and building contractors still have 13 SEER air conditioning units in their inventory by that date?

The DOE is allowing an 18-month grace period to sell, distribute and install these units, as long as they have a manufacturing date before January 1, 2015.

==> See Test Procedures and Standards for All Appliances Here

New Dept. of Energy (DOE) Regulations for Heating and Cooling Efficiency in Texas

Standards for air conditioners, heat pumps, and weatherized furnaces will take effect on January 1, 2015

To determine compliance with DOE standards, manufacturers must follow the test procedures specified at 10 CFR 430.23(m)PDF for residential central air conditioners and heat pumps as of April 21, 2008.

The methods to conduct the test procedure are further specified in 10 CFR Part 430 Appendix M to Subpart B PDF.

This information is also in the Electronic Code of Federal Regulations.

Helpful Links

Find tips and guidance for making your home, workplace, or vehicle more energy efficient visit EnergySavers.gov.

DOE supports the testing and verification of ENERGY STAR® products in close collaboration with the Environmental Protection Agency.

ENERGY STAR qualified central air conditioners are about 14% more efficient than standard models.

===> More at Energy Star

We specialize in Air Conditioning & Heating and AC Installation for the Wylie Texas and surrounding areas.

For Over 30 Years Our Goal Has Been To Ensure The Complete Satisfaction Of Every Customer.
Copyright © 2019. All Rights Reserved.
star-omap-markercalendarphoneenvelope linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram